- Monday 8:00 am - 5:30 pm
- Tuesday 8:00 am - 5:30 pm
- Wednesday 8:00 am - 5:30 pm
- Thursday 8:00 am - 5:30 pm
- Friday 8:00 am - 5:30 pm
- Saturday 8:00 am - 3:00 pm
- Sunday Closed
Notre Dame
Motors
Family owned and operated since 1942
ID # 26825872
Krone Pull Type Mowers EasyCut
Call for Price
Overview
Specifications
duogrip
easycut
the cutterbar
the cutting discs
cri roller conditioner
cv steel tine conditioner
safecut cutterbar protection
Videos
|
Trailed disc mowers meet a wide variety of needs and requirements which vary by country, region and harvest chain. Our extensive range of mower options gives you the choice to select the specification that suits your needs. For example, choose the V-steel tine conditioner with distributing hood or the CRi roller conditioner, the swathing belt and the hydraulic swathing boards. |
Model
Pull Type Mowers EasyCut
Category Name
Agriculture
Year
2023
Sale Type
New
Manufacturer
Krone
DuoGrip
For perfect control
|
| At the heart of high-quality forage is a perfect and clean cut, which in turn is down to the specifi c design of the mower and its suspension and control system. The KRONE DuoGrip system not only suspends the mower in its centre of gravity but also provides lateral guidance, allowing the cutterbar to follow the ground contours even more accurately for more protection to the sward and high-quality forage even in diffi cult conditions. |
Quick and easy: This crank controls the cutting height. EasyCut 2801 CV and EasyCut 3201 CV may be specifi ed with an optional hydraulic ram, which tilts the mower as it crosses tramlines and runs through dips. |
An ideal system: A huge vertical travel allows the cutterbar to adapt to ground contours. Pivoting in its double frame, the mower closely follows the ground – delivering clean forage and protecting the sward. |
EasyCut TS 320
EasyCut TS 320 with side-mounted drawbar, without conditioner
|
Are you looking for a powerful trailed mower without conditioner that works at a width of about 3.16 m? Then the Krone EasyCut TS 320 with DuoGrip centre-of-gravity suspension is the machine for you. This mower stands out for an extremely low power input, maximum stability as well as a superior level of specification and operator comfort. |
The trailed EasyCut TS 320 without conditioner impresses by its superior performance, very light draft and good ride qualities. Compared with a mounted mower, the trailed machine reduces the load on the tractor's rear axle and its hydraulics. As another plus, it offers a much lower transport height and hence better road safety. The transport position does not exceed 3.00 m. |
The V-shaped frame of the EasyCut TS 320 model with side-mounted drawbar is robust and compact. Its generous ground clearance makes for plenty of vertical travel. Suspended in its centre of gravity and linkage controlled, the cutterbar swings back and up through a large angle avoiding obstacles, a design that ensures clean work also in undulating fields. The cutterbar is driven by a powerful right-angle gearbox which makes for a frictional connection and is arranged behind the inner top hat. |
It takes just a minute to adjust the machine perfectly to the current conditions. The cutterbar’s ground pressure is set by tensioning the coil springs. |
Equipped with side-mounted drawbar and pivoting gearbox, the unit cuts around any bend. The two-point headstock attaches to the height-adjustable link arms – although the floating drawbar has become the preferred choice of attachment in some countries. |
|
The front curtain folds up to give convenient access to the discs for easy cleaning and blade replacement.  |
Running inline behind the tractor during road travel, EasyCut TS 320 does not exceed the statutory 3 m transport width, gives plenty of ground clearance and is approved to 40 km/h maximum speed. This is the machine to travel quickly between sites. |
EasyCut 6210 CV
Featuring mid-mounted drawbar and conditioner
|
| A 6.20 m working width and a central drawbar make EasyCut 6210 CV one of the most effective trailed mowers on the market. These machines stand out for superior efficiency,maximum stability as well as an advanced level of specification and operator comfort. The CV tine conditioner produces best quality forage. |
|
Take your pick: EasyCut 6210 CV cuts to the right or left of the tractor. The changeover is straightforward indeed. Simply swing the drawbar to the other side as you do the headland turn and match up with the previous pass without mowing in beds. The tractor is not running in standing crop so that clean and loss-free cuts are guaranteed. This way you always use the machine to potential and, in combination with a front-mounted mower, at full work width. In sloping fields, it allows the tractor to work across the slope.  |
Time is money: Although high work rates are the priority for contractors, travel time is another important cost factor. EasyCut 6210 CV is a swift road machine that travels at 40 km/h (25 mph). The robust running gear with air brake system and the large-diameter wheels translate into excellent road safety and operator comfort. The large warning panels and road lights provide safety at dawn and at night. |
Turn on the spot: The swivel-head gearbox (1,000 rpm) on the two-point headstock provides the flexibility to turn through 90° and larger angles while the main driveshaft does not move, allowing drive power to flow vibration-free to the cutterbar. |
Wide work widths or narrow transport widths: It takes just a few seconds to swing the machine from work into transport position and vice versa. There is no need to leave the tractor. It does not take a sophisticated system to control the semi-mounted chassis and its hydraulic ram. A 2.99 m (9'10") transport width and 15.0/55-17 tyres ensure this high-capacity mower provides superior rides without requiring special permission for public roads. |
EasyCut TC 400 CV L 400 CRi L 500 CV L 500 CRi
EasyCut Trailed Center Mower Conditioner
The EasyCut Trailed Center (TC) mower conditioner comes with the option of a 2-point hitch or drawbar and various conditioner options. These mowers can reach production of 15 -18 acres per hour, depending on model, and is the ideal mower conditioner for fields with narrow gates, due to the optional end wise transport. |
|
The Cutterbar
Rugged and well proven
|
|
The KRONE EasyCut disc mowers provide the cleanest and most accurate cuts. The enclosed and fully welded cutterbar operates dependably and leak-free over many years of hard work. Massive and oil-immersed spur gears impress by very quiet and reliable running in sustained peak-load operation.  |
Forget about stripes: With some discs turning in pairs towards each other and others away from each other, it was necessary to redesign the degree of blade overlap to ensure cleanest cuts. Therefore we increased the overlap between those discs that turn outwards. This way you achieve stripeless cuts in light and young material. In addition, the blades turning to the rear are set further apart to encourage a smooth flow of large volumes of crop. |
Swathing: The eccentric bearings are positioned in such a way that the discs turn inwards, feeding the material to the middle for the tractor to straddle the swath. |
|
No swathing: With discs spinning in the B sense of rotation, EasyCut spreads the material across the full cutting width. All discs turn in pairs, spreading the material across the working width for faster and more uniform wilting.  |
The Cutting Discs
Perfect in every detail
|
|
Added protection: We welded curved stops between the individual skids that protect the cutterbar from damage and also contoured the underside of the stops in such a way that no material can build up here and instead flows smoothly to the rear.  |
|
Changing blades in an instant: Quick-change blades are a must for many farmers and contractors. These blades are quick and easy to reverse or replace in situ.  |
Minimum wear: With the blades being free to spin through 360° on their pins, they are hard-wearing and self-cleaning, well protected and will not foul with the blades on the neighbouring discs. |
CRi Roller Conditioner
A gripping system
|
Full-width conditioning: The CRi rollers are full-length and single-piece, which suggests uniform treatment across the full working width. Thanks to stepless adjustment of roller clearance and pressure, the system easily adjusts to the current crop yield and variety. The polyurethane coating offers lasting resistance to abrasion and wear. |
250 mm (10") in diameter: The massive CRi rollers ensure a smooth and unobstructed crop flow whilst reducing tractor power. |
|
Force-fit connections: The drive power to the roller conditioner flows directly and slip-free via gearboxes. The bottom box driving the bottom roller is integrated in the gearbox that drives the cutterbar, which is located behind the left top hat.  |
CV Steel Tine Conditioner
The specialist for quality forage
|
|
The KRONE CV rotor with V-shaped and grippy steel tines spreads the crop at the full working width. Its massive 640 mm diameter and the helical arrangement of the tines warrant a continuous crop flow, high throughputs and superior conditioning.
 |
|
Two in one: Cutterbar and conditioner share the same gearbox. The CV conditioner is powered by an integral, two-speed gearbox which offers 600 rpm and 900 rpm.  |
|
Spreading effectively at full width: The V-tines are made from hardened steel and mount at a steep angle, treating the material at the full working width. The tines pivot to the rear when hitting a foreign object whereas their restricted forward angle increases the pivot pin‘s lifetime.  |
SafeCut Cutterbar Protection
Cutterbar protection
|
|
Two-fold protection: Orbiting within the sphere of the mower bed and never protruding beyond the skids, the EasyCut discs benefit from two-fold protection. Additional protection comes from the standard SafeCut system.  |
|
Simply ingenious: Each disc on the mower has its own individual impact protection. When the blade hits an obstacle the shockload is transferred to a roll pin which breaks. As a result, the disc automatically threads 15 mm up on the drive shaft.  |
|
Effective and safe: If the system is suddenly overloaded, the impact is not directed to the spur gears in the driveline, instead a roll pin in the sprocket drive shaft shears off. The pinion shaft continues spinning, jacking up the disc in question and moving it out of the risk zone and the orbit of the neighbouring discs. As a result, SafeCut prevents damage to the spur gears and the neighbouring discs. Replacing the roll pin takes a few minutes and is not very costly.  |
Videos
Model
Pull Type Mowers EasyCut
Category Name
Agriculture
Year
2023
Sale Type
New
Manufacturer
Krone
Quantity
0
