ID # 35161405

Versatile OFFSET DISC SD550

Call for Price

Get a Quote Get Financed Value a Trade Contact Us Book a Demo Get Directions Get Directions Print

Versatile’s Legacy tillage has been proven over hundreds of thousands of acres. Versatile offset discs are all-purpose machines built with the strength needed to perform. An assortment of weight classes, working widths ranging from 10' to 20' (3.0-6.1 m), and 10 ½" or 12" (266 or 305 mm) blade spacings are available. This wide selection of features and options means that the right machine is available to suit any operational needs.

SD550

The Versatile SD550 is an all-purpose offset disc that provides the flexibility of doing either primary or secondary tillage work. The SD550 weighs 550 lb/ft and is available in either 9" or 10.5" blade spacing with 24" or 26" blades.

Specifications

Model

SD550

Category Name

Agriculture

Year

2025

Sale Type

New

Manufacturer

Versatile

Weight

560+ lbs/ft

Blade Spacing

9" or 10.5"

Working Width

10' to 20' (3 to 6.1 m)

features

Stone Flex Hanger

Stone-Flex hangers are standard on all Versatile offset discs. With the extreme thrust forces present on a disc and the potential for large rocks in some areas, the Stone-Flex hanger is a perfect choice for absorbing shock loads. The 1 ¼" x 2- ½” C-shaped spring steel reacts to both vertical and horizontal forces. Disc blade penetration is not compromised.

Blade Scrapers

All Versatile discs feature one piece, 4" wide blade scrapers made of carbon steel for long wear life. The scrapers are U-bolt mounted for maximum adjustment on a heavy-duty tubular steel bar. All scrapers are located high end to the inside of the blade for maximum trash flow and to reduce draft requirements. This eliminates the need for trash guards.

Adjustable Gang Angle

Versatile offset discs allow operators to change the angle of cut between three (two on the SD1050) different positions. This causes the disc to cut with more or less aggressive discing action. Soil conditions such as residue or trash levels, moisture, etc. change from year to year and only a disc with adjustable gang angle will perform well in all these different types of conditions.

Positive Depth Control

A 5½” heavy-duty rockshaft with greaseable bearings is the foundation of the single offset disc's depth control system. A single cylinder with positive depth control segments provides consistent and repeatable working depth. An adjustable crank allows the operator to quickly level the disc from front to back to perfectly match the tillage conditions.

Removable Spindle Axles

Versatile offset discs are built with maintenance concerns in mind. All spindle axles are designed for easy removal and maximum strength. Each spindle is bolted into a sleeve and can be removed by simply removing the bolt and pulling out the axle. This will save valuable time if repairs to a tire are needed.

Steel Fabricated Spools

Versatile discs feature fabricated steel half and full spools. Unlike cast iron spools, steel spools can withstand far greater shock loads from rocks or stumps thereby eliminating spool breakage. Compressed to the industry’s highest clamp load during assembly, Versatile's fabricated spools ensure the gang will not shift and become loose.

Large Gang Shaft

All Versatile discs feature a large 1 15/16" diameter, high carbon steel gang shaft. This gang shaft along with Versatile's steel fabricated spools allows the gang assembly to be torqued at the factory to 3,200 ft/lb.

Furrow Filler Blades

In order to get the most uniform and consistent field finish, Versatile offset discs have furrow filler blades as standard equipment. On larger working widths two furrow fillers are standard, one 4" smaller than the working blades and one 8" smaller, (only one furrow filler is used on model SD1050). One furrow filler blade that is 4" smaller than the working blades is standard on smaller working widths. These blades along with full sizes blades work together to create a uniform well-worked field.

Multiple Hydraulic Upgrades

Optional Single Point Depth Control and Hydraulic Hitch Angle Adjustment allow the operator to quickly fine tune their offset disc to the tillage conditions they are encountering. These upgrades allow depth setting and hitch angle corrections to be made in seconds with minimal effort.

Pan-Style Scrapers

Available on models SD550 and SD650, optional pan-style scrapers contact lower down on the disc blade to provide more effective cleaning and prevent sticky soil from building up. As a result, blades cut cleaner and draft is lighter. Scraper material is a boron alloy steel for enhanced wear characteristics. All scrapers are adjustable individually or as a group for optimum field performance.

Disc Blades

Quality disc implements start with quality blades. All Versatile discs feature the latest technology in micro alloy boron steel blades that combine the important performance characteristics of superior breakage - with long wearing abrasion resistant hardness.

options

Versatile offset discs are designed and equipped for tough conditions straight from the factory. Options are available to further configure the machine depending on the model and application. Some options and sizes are only available on specific models of tandem disc.

Working widths:

• 10-20' (3.0-6.1 m)

Blade Spacing

• 10.5" or 12" (267 or 305 mm) (offset disc)

Disc Gang Options

• 211, 410WSS, and T2-215 heavy-duty bearings available, depending on model
• Interlocking spool upgrade available with T2-215 heavy-duty bearings
• Bearing trash guards
• Bearing wear plates

Blades & Scrapers

• 26", 28" and 30" (660, 711 and 762 mm) diameter blades, choice of notched or plain edge (offset disc)
• Heavy-duty flat bar or Wide Pan floating scrapers

Hydraulic System Upgrades

• Single point depth control
• Hydraulic hitch angle adjustment

literature

Name	Link
DOWNLOAD BROCHURE	Download
DOWNLOAD SPECS	Download

Documents

Call for Price

Pricing excludes licensing and tax

Get a Quote Get Financed Value a Trade Contact Us View Pre-Owned Book a Demo Get Directions Get Directions Print

Notre Dame
Motors

Family owned and operated since 1942