Krone Front-mounted disc mowers EasyCut F
|
|
Specifications
Model |
Front-mounted disc mowers EasyCut F
|
Year |
2023
|
Sale Type |
New
|
Manufacturer |
Krone
|
Quantity |
0
|
Manufacturer Qty |
0
|
Price |
Contact for price CAD
|
|
|
|
Description
- Quick-change blades
- SafeCut: Individually protected discs
- SmartCut: Stripeless cuts from optimum blade overlaps
- Available conditioner versions: CV version with V steel tines or CR version with polyurethane rollers or M-Rolls
- Compact M models
- Models with powered top hats
|
|
|
SAFECUT
|
SafeCut
- Full driveline protection
- Neighbouring discs will not collide
- No wear and damage
- Quick roll pin change, minimum costs
|
Foreign objects can cause great damage and costly repairs. Not so if the KRONE SafeCut is in place, which allows the discs to move away from obstacles for maximum productivity and comfort. Our DLG award winning disc protection system is a base specification on all EasyCut models. |
An ideal system: As the discs are spinning, they place no load on the roll pins, because the bearings are tensioned by a nut and two clamping screws. As a result, the roll pins do not suffer from material fatigue and even after many hours of operation they will break only at their inbuilt load level. |
Peace of mind: Instead of transferring the full shockload to the spur gears, the roll pin in the sprocket driveshaft breaks when there is a momentary overload. The pinion shaft continues spinning, jacking up the disc in question and the disc moves out of the risk zone and the orbit of the neighbouring discs. This way SafeCut prevents damage to the spur gears and the neighbouring discs. Replacing the roll pin takes a few minutes and is not very costly. |
|
SMARTCUT
|
|
EASYCUT F
|
F_280_•_F_320_•_F_360
280_M_•_F_320_M_•_F_360_M
- Ideally suited for compact tractors and work in mountain regions
- Low dead weight, little weight on the front axle
- Compact build, excellent handling
- Pivoting centre-of-gravity suspension System
|
Mountain farming is a particular challenge to man and machine. The front-mounted 2.73 m (8’11") EasyCut F 280 M, the 3.16 m (10'4") F 320 M, and the 3.60 m (11'9") F 360 M disc mowers are the ideal machines to take on the challenge, boasting a compact design, a centre of gravity close to the tractor, perfect cuts on steep slopes and good attachment options to light-weight and very compact mountain tractors. The EasyCut 360 M model is the ideal machine for huge track widths and offers generous overlap in combination with rear mowers. |
Perfect ground hugging: The pushing suspension design provides a generous vertical travel and combines with long skids and an optional telescoping top link to provide optimum ground hugging in every way. Mounted extremely close to the tractor, the mower travels very little when gliding over undulations. The design reduces wear on the driveshaft and enhances operator overview. |
Generous up and down travel: With each end pivoting through 30 cm (1'), EasyCut F 280 M and F 320 M guarantee cleanest cuts in undulating terrain and a well protected sward. |
Centre-of-gravity suspension: The front mowers EasyCut F 280 M, F 320 M and F 360 M are not suspended in their mid-point but in their centre of gravity – a design that distributes the pressure uniformly across the entire work width and leads to cleanest cuts. |
Compact transport position: The guard ends on EasyCut F 280 M and F 320 M front fold back to bring the transport width down to 3.00 m (9'10''). They can also fold hydraulically as an option. EasyCut 360 M has transport width of 3.45 m (11'4"). |
F_320_CV_•_F_320_CR_Push/Pull
- Work width: 3.16 m
- PUSH-type or PULL-type cutterbar
- Choose between aggressive steel tines or chevron-profiled rollers for intensive treatment
|
The front mowers F 320 CV with tine conditioner and F 320 CR with roller conditioner are specialists that warrant high-quality forage. Featuring either a large 64 cm diameter tined rotor or two 25 cm conditioning rollers, these mowers are the pros that deliver high-quality forage and best conditioning even in high-yielding crops. |
With no A-frame required, there is plenty of space around the headstock. The pushed design makes for a very compact machine, reduces weight and is gentler on the turf. The transverse pivoting action is provided by the tractor’s link arms. The pulled version has the suspension springs integrated in the machine’s suspension system. The tension of the two springs is controlled from one single crank.
|
The pulled headstock design allows the machine to break back and up through a larger angle, hence making it more suitable for operation in rolling land.
|
The pulled headstock has a hydraulic cylinder that raises the mower extra high, providing plenty of ground clearance in any type of terrain. This means there is plenty of clearance for butterfly combinations to handle high-volume swaths on the headland.
|
Each end of the guard can be folded back to bring transport width down to 3 m. This can also be done hydraulically from the tractor as an option.
|
F_360_CV_•_F_360_CR_Push/Pull
- 3.60 m (11'10") work width, 3.45 m (11'4") transport width
- Choose between aggressive steel tines or chevron-profiled rollers for intensive treatment
- Pushed or pulled design
|
The KRONE EasyCut F 360 CV and CR front mowers can have a pushed or pulled cutterbar. Working at a width of 3.60 m, the machine suits wide tractors with oversize tyres. More generous overlaps within the combination result in clean cuts on slopes and in curves and make for larger work widths in general.
|
The KRONE EasyCut F 360 CV and CR front mowers can have a pull-type suspension. This allows the mower to break back and up for added protection from foreign objects.
|
The floating EasyCut F 360 CV and F 360 CR in pulled configuration are compact and slim machines that provide excellent visibility. These machines impress by a low dead weight and cleanest cuts.
|
Adjustable springs optimize the ground pressure and allow the machine to float. A telescoping top link is available to deliver perfect cuts in undulating terrain.
|
|
THE CUTTERBAR
|
The_Cutterbar
- Fully welded: Robust, sealed and permanently lubricated
- The durable satellite drives have massive spur gears for quiet running and superior efficiency
- No inner shoe for trouble-free cutting
|
The enclosed and fully welded cutterbar meets the highest quality standards and operates dependably and leak-free over many years of hard work. Massive and oil-immersed spur gears impress by very quiet and reliable running in sustained peak-load operation.
|
Using welding robots and CNC technology, KRONE manufactures its cutterbars to the highest quality standards, ensuring they are fully welded and permanently lubricated. After all, the cutterbar is the heart of every disc mower.
|
The KRONE developed satellite driveline comprises massive spur gears with up to 66 teeth which transfer the power all the way down to the very last disc. The large-diameter gears rotate at reduced speeds, with a higher number of teeth meshing with the neighbouring gearwheels for even quieter running, ultimate efficiency and maximum longevity. The auxiliary gears drive one disc each and as a result are exposed to only minimum loading.
|
|
BROCHURE PDF
|
|